Omnistor 5003 Safari Residence
The new Safari Residence consists of two PVC removable side panels and one front panel. It is designed to convert the existing 5003 awning into an enclosed awning for increased privacy and increased shelter.The seams of the Safari Residence are welded instead of stitched for the most demanding sections. This ensures stronger connection.
The front is slid into the lead rail of the awning. For the connection between the awning fabric and side panel, the awning fabric is kept in place by using a clamping profile. The side panel is then inserted into the same profile to complete the connection. In this way a wind and waterproof connection is achieved without deformation to the fabric. The side panels are joined to the front profile by means of a synthetic double profile.
The front panel can be rolled up separately and the front panel window has a zipper from 3.00m onwards. The left hand side panel has a mosquito screen and PVC curtain. For increased stability there’s a possibility to intergrate a diagonal support between the mast profile and the clamp profile.
Choosing a Safari Room.
You need to know: 1) The length of your awning. 2) The mounting height of your awning. This will allow you to choose the correct Safari Room option for your 5003 awning.
A - Mounting Height H F
2.00m-2.19m small +20cm 1.85m
2.20m - 2.39m medium +40cm 1.85m
2.40m - 2.60m large +60cm 1.85m
2.61m - 2.80m x large + 60cm 2.05m